Skip to content
Barbouri's Electronics Projects
Barbouri's Electronics Projects

Barbouri's Electronics Projects

Things I build and repair in my spare time.

Month: September 2016

Posted on September 30, 2016November 15, 2019

Teensy 3.5 and 3.6 microcontrollers have arrived!

Teensy 3.5 and 3.6 boards
Teensy 3.5 and 3.6 boards with pinout cards

My Teensy 3.5 and 3.6 boards have arrived! Continue read­ing “Teensy 3.5 and 3.6 micro­con­trollers have arrived!”

Posted on September 30, 2016November 15, 2019

Whole House Energy Monitor

Home whole house Energy Monitor System

EMON Pi in enclosure with RFM12Pi wireless board

emon-Base in enclo­sure with RFM12Pi wire­less board

A home ener­gy mon­i­tor­ing and man­age­ment sys­tem using a com­pact (emon-Tx) mea­sure­ment and trans­mit­ter board, along with a Raspberry Pi based (emonBase) base sta­tion, and sev­er­al oth­er wire­less mod­ules (emon-RH).  Continue read­ing “Whole House Energy Monitor”

Recent Posts

  • Power Designs 6010D Universal DC Source Restoration
  • 4–20mA Current Receiver
  • 4–20mA Current Transmitter
  • General Radio Co. 1531AB Strobotac Refurbishment
  • IV-27M IceTube Clock Project

Recent Comments

  • Sean McQ on IV-27M IceTube Clock Project
  • Barbouri on Power Designs 6050D Power Supply Repair
  • Barbouri on Updated IceTube Clock Design
  • Sean on Updated IceTube Clock Design
  • Keith on Milliohm Meter Version 1.5

Archives

  • November 2020
  • July 2020
  • June 2020
  • March 2020
  • December 2019
  • November 2019
  • October 2019
  • August 2019
  • June 2019
  • February 2019
  • November 2018
  • August 2018
  • July 2018
  • May 2018
  • March 2018
  • January 2018
  • December 2017
  • November 2017
  • August 2017
  • April 2017
  • March 2017
  • January 2017
  • December 2016
  • October 2016
  • September 2016
  • August 2016
  • July 2016
  • June 2016
  • May 2016

Categories

  • Electronics Projects
  • Electronics Shop
  • Test Equipment
  • Uncategorized
  • Vintage

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Standard disclaimer:

The designs and any asso­ci­at­ed infor­ma­tion is dis­trib­uted in the hope that it will be use­ful, but WITHOUT ANY WARRANTY; with­out even the implied war­ran­ty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
All con­tent pro­vid­ed on this blog is for infor­ma­tion­al pur­pos­es only. The own­er of this blog makes no rep­re­sen­ta­tions as to the accu­ra­cy or com­plete­ness of any infor­ma­tion on this site or found by fol­low­ing any link on this site.
The own­er will not be liable for any errors or omis­sions in this infor­ma­tion nor for the avail­abil­i­ty of this infor­ma­tion. The own­er will not be liable for any loss­es, injuries, or dam­ages from the dis­play or use of this information.

Proudly powered by WordPress