Skip to content
Barbouri's Electronics Projects
Barbouri's Electronics Projects

Barbouri's Electronics Projects

Things I build and repair in my spare time.

Tag: IV-27M

Posted on July 4, 2020July 6, 2020

IV-27M IceTube Clock Project

IV-27M IceTube clock Rev. 0.38 board oper­at­ing on 5.25 volt supply

Adapting the IV-18 IceTube clock design to use the 13 dig­it IV-27M VFD tube.

Continue read­ing “IV-27M IceTube Clock Project”

Recent Posts

  • Hewlett Packard / Agilent 6632B Upgrade
  • Stanton Instruments Ltd. B15 Balance Restoration
  • Cree MX6 XLamp build
  • New display boards for Power Designs D‑Series power supplies
  • Power Designs 6010D Universal DC Source Restoration

Recent Comments

  • Jerry Wasinger on Wien Bridge Oscillator Design
  • Barbouri on Hafler DH-110 Preamplifier Refresh
  • Luke Vania on Hafler DH-110 Preamplifier Refresh
  • SB_city_techs on Hewlett Packard HP 403B AC Voltmeter Restoration
  • Barbouri on Programmable Voltage Reference Case

Archives

  • April 2021
  • January 2021
  • November 2020
  • July 2020
  • June 2020
  • March 2020
  • December 2019
  • November 2019
  • October 2019
  • August 2019
  • June 2019
  • February 2019
  • November 2018
  • August 2018
  • July 2018
  • May 2018
  • March 2018
  • January 2018
  • December 2017
  • November 2017
  • August 2017
  • April 2017
  • March 2017
  • January 2017
  • December 2016
  • October 2016
  • September 2016
  • August 2016
  • July 2016
  • June 2016
  • May 2016

Categories

  • Electronics Projects
  • Electronics Shop
  • Test Equipment
  • Uncategorized
  • Vintage

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Standard disclaimer:

The designs and any asso­ci­at­ed infor­ma­tion is dis­trib­uted in the hope that it will be use­ful, but WITHOUT ANY WARRANTY; with­out even the implied war­ran­ty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
All con­tent pro­vid­ed on this blog is for infor­ma­tion­al pur­pos­es only. The own­er of this blog makes no rep­re­sen­ta­tions as to the accu­ra­cy or com­plete­ness of any infor­ma­tion on this site or found by fol­low­ing any link on this site.
The own­er will not be liable for any errors or omis­sions in this infor­ma­tion nor for the avail­abil­i­ty of this infor­ma­tion. The own­er will not be liable for any loss­es, injuries, or dam­ages from the dis­play or use of this information.

Proudly powered by WordPress