Skip to content
Barbouri's Electronics Projects
Barbouri's Electronics Projects

Barbouri's Electronics Projects

Things I build and repair in my spare time.

Month: June 2020

Posted on June 30, 2020June 30, 2020

Prusa Mini 3D printer and enclosure Project

Getting my Prusa Mini 3D print­er IKEA Lack enclo­sure set­up, and mak­ing some minor mod­i­fi­ca­tions to the print­er.

Continue read­ing “Prusa Mini 3D print­er and enclo­sure Project”
Posted on June 24, 2020June 24, 2020

Hewlett Packard 3456A Digital Voltmeter

HP Hewlett Packard 3456A Front pan­el short­ed input, still warm­ing-up

Cleanup, restora­tion, and cal­i­bra­tion of a Hewlett Packard (HP) 6 1/2 dig­it 3456A Digital Voltmeter.

Continue read­ing “Hewlett Packard 3456A Digital Voltmeter”

Recent Posts

  • General Radio Co. 1531AB Strobotac Refurbishment
  • IV-27M IceTube Clock Project
  • Prusa Mini 3D printer and enclosure Project
  • Hewlett Packard 3456A Digital Voltmeter
  • Updated IceTube Clock Design

Recent Comments

  • Barbouri on DIY Open EVSE V4.23
  • Vasu on DIY Open EVSE V4.23
  • Barbouri on DIY Open EVSE V4.23
  • Vasu on DIY Open EVSE V4.23
  • Barbouri on DIY Open EVSE V4.23

Archives

  • July 2020
  • June 2020
  • March 2020
  • December 2019
  • November 2019
  • October 2019
  • August 2019
  • June 2019
  • February 2019
  • November 2018
  • August 2018
  • July 2018
  • May 2018
  • March 2018
  • January 2018
  • December 2017
  • November 2017
  • August 2017
  • April 2017
  • March 2017
  • January 2017
  • December 2016
  • October 2016
  • September 2016
  • August 2016
  • July 2016
  • June 2016
  • May 2016

Categories

  • Electronics Projects
  • Electronics Shop
  • Test Equipment
  • Uncategorized
  • Vintage

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Standard disclaimer:

The designs and any asso­ci­at­ed infor­ma­tion is dis­trib­uted in the hope that it will be use­ful, but WITHOUT ANY WARRANTY; with­out even the implied war­ran­ty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
All con­tent pro­vid­ed on this blog is for infor­ma­tion­al pur­pos­es only. The own­er of this blog makes no rep­re­sen­ta­tions as to the accu­ra­cy or com­plete­ness of any infor­ma­tion on this site or found by fol­low­ing any link on this site.
The own­er will not be liable for any errors or omis­sions in this infor­ma­tion nor for the avail­abil­i­ty of this infor­ma­tion. The own­er will not be liable for any loss­es, injuries, or dam­ages from the dis­play or use of this infor­ma­tion.

Proudly powered by WordPress