Skip to content
Barbouri's Electronics Projects
Barbouri's Electronics Projects

Barbouri's Electronics Projects

Things I build and repair in my spare time.

Month: November 2020

Posted on November 22, 2020November 22, 2020

Power Designs 6010D Universal DC Source Restoration

Restoring a Power Designs Inc. 6010D pow­er supply

Power Designs Inc. 6010D pow­er sup­ply after restora­tion and calibration.
Continue read­ing “Power Designs 6010D Universal DC Source Restoration”
Posted on November 7, 2020November 7, 2020

4–20mA Current Receiver

4-20mA Receiver Assembly
4–20mA Receiver Assembly

Building a 4–20mA cur­rent trans­mit­ter and receiv­er for some upcom­ing automa­tion projects.

Continue read­ing “4–20mA Current Receiver”
Posted on November 6, 2020November 8, 2020

4–20mA Current Transmitter

4–20mA cur­rent trans­mit­ter board ready for components

Building a 4–20mA cur­rent trans­mit­ter and receiv­er for some upcom­ing automa­tion projects.

Continue read­ing “4–20mA Current Transmitter”

Recent Posts

  • Power Designs 6010D Universal DC Source Restoration
  • 4–20mA Current Receiver
  • 4–20mA Current Transmitter
  • General Radio Co. 1531AB Strobotac Refurbishment
  • IV-27M IceTube Clock Project

Recent Comments

  • Barbouri on Updated IceTube Clock Design
  • Sean on Updated IceTube Clock Design
  • Keith on Milliohm Meter Version 1.5
  • Barbouri on Milliohm Meter Version 1.5
  • Keith on Milliohm Meter Version 1.5

Archives

  • November 2020
  • July 2020
  • June 2020
  • March 2020
  • December 2019
  • November 2019
  • October 2019
  • August 2019
  • June 2019
  • February 2019
  • November 2018
  • August 2018
  • July 2018
  • May 2018
  • March 2018
  • January 2018
  • December 2017
  • November 2017
  • August 2017
  • April 2017
  • March 2017
  • January 2017
  • December 2016
  • October 2016
  • September 2016
  • August 2016
  • July 2016
  • June 2016
  • May 2016

Categories

  • Electronics Projects
  • Electronics Shop
  • Test Equipment
  • Uncategorized
  • Vintage

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Standard disclaimer:

The designs and any asso­ci­at­ed infor­ma­tion is dis­trib­uted in the hope that it will be use­ful, but WITHOUT ANY WARRANTY; with­out even the implied war­ran­ty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
All con­tent pro­vid­ed on this blog is for infor­ma­tion­al pur­pos­es only. The own­er of this blog makes no rep­re­sen­ta­tions as to the accu­ra­cy or com­plete­ness of any infor­ma­tion on this site or found by fol­low­ing any link on this site.
The own­er will not be liable for any errors or omis­sions in this infor­ma­tion nor for the avail­abil­i­ty of this infor­ma­tion. The own­er will not be liable for any loss­es, injuries, or dam­ages from the dis­play or use of this information.

Proudly powered by WordPress