Barbouri - Page 7 - Barbouri's Electronics Projects

August 14, 2017November 15, 2019

10 Volt Reference Using Vintage IC’s

Testing and calibrating the 10 volt reference

Building a 10 volt reference using some vintage AD584 IC’s from 1983.

Continue reading “10 Volt Reference Using Vintage IC’s”

March 12, 2017November 15, 2019

Low Noise Amplifier for SDR Radio ADS‑B Ver. 2.3 with 1090MHz ceramic filter

A project to design and build a Low Noise Amplifier (LNA) and 1,090 MHz bandpass filter for receiving ADS‑B transmissions on a Software Defined Radio (SDR).

Top of LNA+Filter 1090 version 2.3 bare circuit board

Continue reading “Low Noise Amplifier for SDR Radio ADS‑B Ver. 2.3 with 1090MHz ceramic filter”

March 10, 2017November 6, 2025

DIY Open EVSE V4.23

Construction and circuit information for the DIY Open EVSE V4.23 electric vehicle charging system.

Open EVSE V4.23 circuit board Version 4.23 for electric vehicle charging using the SAE J1772 standard

The DIY Open EVSE circuit board Version 4.23 is used for electric vehicle charging using the J1772 standard. It is an Open-source hardware project which uses the GNU General Public License and is based on the original designs by Chris Howell and Lincomatic.